Battery installation

1 Push and slide to open the lid, then install the two size AA (R6) batteries (supplied) with the correct polarity.

While pressing the lid, slide it.

Be sure to install the battery from the # side.

2 Replace the lid.

Notes on batteries

Make sure that the battery orientation is correct when inserting batteries.

Do not mix an old battery with a new one or different types of batteries.

If you will not use the Remote Commander for a long time, remove the batteries to avoid damage from battery leakage. If batteries have leaked, remove them, wipe and dry the battery compartment, and replace the batteries with new ones.

Notes on Remote Commander operation

Make sure that nothing to obstruct the infrared beam between the Remote Commander and the remote control detector on the projector.

The operation range is limited. The shorter the distance between the Remote Commander and the projector is, the wider the angle within which the commander can control the projector.

16 Location and Function of Controls