Lamp Mode

Sets the lamp brightness in the projection.

High:Illuminates the projected image brightly.

Standard:Reduces fan noise and power consumption. The brightness of the projected image will be lower compared with the “High” setting.

Lens Control

When set to “Off,” the LENS key on the Remote Commander, and the LENS CONTROL key on the projector do not function.

Direct Power On/Off function

If you will be using a circuit breaker to turn the power for the entire system on and off, set the direct power on function to “On”. You can turn the power on/off without pressing the power key on the projector.

High Altitude Mode

Off: Use this setting when using the projector at normal altitudes.

On: Use this setting when using the projector at an altitude of 1,500 m (4,921 feet) or higher.

Security Lock

Turns on the projector’s security lock function.

Off: Turns off the security lock function.

On: Turns on the security lock function, which locks the projector once a password has been set.

For details, see “Using the security lock” on page 25.

The INFORMATION Menu

The INFORMATION menu displays the horizontal and vertical frequencies of the input signal and the used time of the lamp.

INFORMATION

Input A

Memory

 

 

fH:

48.47 kHz

number of

fV:

60.00 Hz

a input

 

No.23

 

1024x768

signal

Lamp Timer:

4 H

Signal

IP Address:

192 . 168. 0. 1

Subnet Mask:

255.255. 0. 0

type

Menu Items

fH

Displays the horizontal frequency of the input signal.

The displayed value is approximate.

fV

Displays the vertical frequency of the input signal.

The displayed value is approximate.

Lamp Timer

Indicates how long the lamp has been turned on.

IP Address

Displays the IP address that is set for the projector.

Subnet Mask

Displays the subnet mask that is set for the projector.

Note

These only display on the screen.

36 The INFORMATION Menu