For dealers

Please read throughly this Safety Regulations and Installation Manual contained in the CD-ROM for safe installation.

On safety

•Avoid using an extension cord with a low voltage limited since it may cause the short-circuit and physical incidents.

•To carry the projector, be sure to use the carrying handle. Do not hold other parts of the projector, especially the lens, nor catch your finger between the handle, floor, and the projector.

•Do not catch your finger between the unit and surface of the floor when moving the projector installed on the floor.

•Be careful not to catch your finger in the cooling fan.

•Do not carry the projector with the cabinet on and with its cover open.

On installation

•When the projector is mounted on the ceiling, the Sony PSS-620 Projector Suspension Support must be used for installation.

•Allow adequate air circulation to prevent internal heat build-up. Do not place the unit on surfaces (rugs, blankets, etc.) or near materials (curtains, draperies) that

may block the ventilation holes. Leave space of more than 50 cm (19 3/4 inches) between the wall and the projector. Be aware that room heat rises to the ceiling; check that the temperature near the installation location is not excessive.

•Install the projector on the floor or ceiling. Any other installation causes a mulfunction such as color irregularity or shortening lamp life.

•Do not install the unit in a location near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust or humidity, mechanical vibration or shock.

•To avoid moisture condensation, do not install the unit in a location where the temperature may rise rapidly.

•Be sure to secure the cabinet cover firmly when installing to the ceiling firmly.

6 Precautions