| VD: |
| Vertical sync input: |
| high impedance, positive/ |
| negative |
INPUT B | Digital RGB: |
INPUT C | Analog RGB/component: 5BNC |
| (female) |
| |
| (75 ohms terminated) |
| G: 0.7 |
| terminated) |
| G with sync/Y: 1 |
| sync negative (75 ohms |
| terminated) |
| |
| ohms terminated) |
| SYNC/HD: |
| Composite sync input: |
| high impedance, positive/ |
| negative |
| Horizontal sync input: |
| high impedance, positive/ |
| negative |
| VD: |
| Vertical sync input: |
| high impedance, positive/ |
| negative |
MONITOR OUT | |
| HD |
| R, G, B: Gain Unity: 75 ohms |
| SYNC/HD,VD: 4 |
| 1 |
| *DIGITAL RGB signal is not |
| output from MONITOR OUT |
| terminal. |
TRIG | Minijack |
| Power on: 12 V DC, output |
| impedance: 4.7 kilohms |
| Power off: 0 V |
CONTROL S IN/PLUG IN | |
POWER | Stereo minijack, 5 |
| power 5 V DC |
NETWORK |
General
Dimensions | |
| (19 ⋅ 6 5/8 ⋅ 19 7/8 inches) |
| (w/h/d) (with the projection |
| parts) |
| |
| (19 ⋅ 6 5/8 ⋅18 3/8 inches) |
| (w/h/d) (with the projection |
| parts) |
Mass | |
| lb 4 oz) |
| |
| lb 1 oz) |
50 Specifications
Power requirements
AC 100 to 240 V, 4.0 A - 1.6 A, 50/60 Hz
Power consumption Max. 400 W
in standby mode: 7 W (when network function is operating)
Heat dissipation
1,365 BTU
Operating temperature
0°C to 35°C (32°F to 95°F) Operating humidity
35% to 85% (no condensation) Storage temperature
10% to 90%
Supplied accessories
Remote Commander (1) Size AA (R6) batteries (2)
Lens cap (1) (for
AC power cord (1)
Air filter (for replacement) (1) Operating Instructions,
Installation Manual for Dealers
Quick Reference Manual (1) Safety Regulations (1) Security Label (1) Warranty Card (1)
Design and specifications are subject to change without notice.
Note
Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.
Optional accessories
Projector Lamp
Projector Suspension Support
Signal Interface Cable