BOthers

Specifications

Optical characteristics

Projection system

 

3 LCD panels, 1 lens, 3 primary

 

color shutter system

LCD panel

1.3-inch TFT SONY LCD panel

 

with micro-lens array 2,359,296

 

pixels (1,024 ⋅ 768 pixels ⋅ 3)

Lens

1.3 times zoom lens (powered)

 

f 50.8 to 64.0 mm/F 1.7 to 2.0

 

* The lens for VPL-FX52L are

 

not supplied.

Lamp

300 W

Projection picture size

 

Range: 40 to 300 inches (diagonal

 

measure)

Light output

ANSI lumen1) 6,000 lm

Projecting distance (Floor Installation) of VPL- FX52 (with standard lens)

40-inches: 1490 to 1820 mm

(4.9 to 6 feet)

60-inches: 2280 to 2780 mm

(7.5 to 9.1 feet)

80-inches: 3060 to 3740 mm

(10.0 to 12.3 feet)

100-inches: 3850 to 4700 mm

(12.6 to 15.4 feet)

120-inches: 4630 to 5660 mm

(15.1 to 18.6 feet)

150-inches: 5810 to 7100 mm

(19.1 to 23.3 feet)

180-inches: 6980 to 8540 mm

(22.9 to 28.0 feet)

200-inches: 7770 to 9500 mm

(25.5 to 31.2 feet)

250-inches: 9730 to 11900 mm

(32 to 39.0 feet)

300-inches: 11690 to 14300 mm

(38.4 to 46.9 feet)

1)ANSI lumen is a measuring method of American National Standard IT 7.228.

Electrical characteristics

Color system NTSC3.58/PAL/SECAM/ NTSC4.43/PAL-M/PAL-N system, switched automatically/ manually

Resolution 750 horizontal TV lines (Video input)

1,024 ⋅ 768 dots (RGB input)

Acceptable computer signals1) fH: 19 to 92 kHz

fV: 48 to 92 Hz (Maximum input resolution signals: UXGA 1,600 ⋅ 1,200 fH: 75kHz, fV: 60Hz)

1)Set the resolution and the frequency of the signal of the connected computer within the range of acceptable preset signals of the projector.

Compatible video signal

15k RGB 50/60Hz,

Progressive Component 50/60Hz DTV (480/60I, 575/50I, 1,080/ 60I, 480/60P, 575/50P, 1,080/ 50I, 720/60P, 720/50P, 540/ 60P), Composite video, Y/C video

Input/Output

VIDEO INPUT

VIDEO: BNC type Composite video: 1 Vp-p ±2 dB sync negative (75 ohms terminated)

SVIDEO: Y/C mini DIN 4-pin type

Y (luminance): 1 Vp-p ±2 dB sync negative (75 ohms terminated)

C (chrominance): burst 0.286 Vp-p ±2 dB (NTSC) (75 ohms terminated),

burst 0.3 Vp-p ±2 dB (PAL) (75 ohms terminated)

VIDEO OUT VIDEO: Loop-through BNC type Loop-through output from the VIDEO IN connector

SVIDEO: Loop-through mini DIN 4-pin type (male) Loop-through output from the S VIDEO IN connector

INPUT A Analog RGB: HD D-sub15-pin (female)

R:0.7 Vp-p ±2 dB (75 ohms terminated)

G:0.7 Vp-p ±2 dB (75 ohms terminated)

G with sync: 1 Vp-p ±2 dB sync negative (75 ohms terminated)

B:0.7 Vp-p ±2 dB (75 ohms terminated)

SYNC/HD:

Composite sync input: 1-5 Vp-p high impedance, positive/ negative

Horizontal sync input: 1-5 Vp-p high impedance, positive/ negative

Specifications 49

Others