4 Press the INPUT key to select the input source.
| To input from | Press INPUT to display |
|
|
Computer etc., connected to the INPUT A connector | INPUT A |
|
|
Computer etc., connected to the INPUT B (digital) | INPUT B |
connector |
|
|
|
Computer etc., connected to the INPUT C connector | INPUT C |
|
|
Video equipment connected to the VIDEO input | VIDEO |
connector |
|
|
|
Video equipment connected to the S VIDEO input | S VIDEO |
connector |
|
|
|
Smart APA (Auto Pixel Alignment) adjusts the picture of the connected equipment so that it is projected clearly.
Notes
•If “Auto Input Search” is set to “On”, the projector searches for the signals from the connected equipment and displays the input channel where the input signals are found.
For details, see “Auto Input Search” in the SET SETTING menu on page 34.
•The smart APA is effective for the analog input signal from a computer only.
5 Switch the equipment to be connected to output to the projector.
Depending on the type of your computer, for example a notebook, or an
by pressing certain keys (e.g., 
/
, etc.), or by changing your computer’s settings.
F7
or 
Fx
and
Fn
Note
The key for switching the computer to output to the projector varies depending on the type of a computer.
6 Press the LENS key on the Remote Commander or LENS CONTROL key on the control panel repeatedly to display “LENS FOCUS.” Then press the arrow keys to adjust.
24 Projecting