Sony VPL-HS20 Step 3: Adjusting, the Picture Size, and Position, 19 GB, and Connections Preparations, 1 Plug the AC power cord into a wall outlet

Step 3: Adjusting

the Picture Size

and Position

Rear remote control detector

6

5,7

Adjuster adjustment button

Front remote control detector

Adjuster

			4
LIGHT	INPUT		2
DYNAMIC	STANDARD	CINEMA
PICTURE MODE
USER 1	USER 2	USER 3
	ENTER
APA	MS SLIDE	MENU
WIDE MODE	LENS	RESET
VOLUME SIDE SHOT			6
+		+
–		–

Tip

The ?/1 (on/standby), INPUT, MENU, and M/m/</,/ENTER (joystick) buttons on the side panel of the projector function the same as those on the remote control.

1 Plug the AC power cord into a wall outlet.

The ON/STANDBY indicator lights in red and the projector goes into standby mode.

ON/	Lights in red.
STANDBY

2 Press the [/1 (on/standby) switch to turn on the projector.

The ON/STANDBY indicator lights in green.

ON/

STANDBY Lights in green.

3 Turn on the equipment connected to the projector.

Refer to the operating instructions of the connected equipment.

4 Press INPUT to project the picture on the screen.

Each time you press the button, the input indication changes. (1 page 26)

Video 1

NTSC 3.58

INPUT

and Connections Preparations

Step 3: Adjusting the Picture Size and Position 19 GB