If the picture does not overlap on the screen as shown above, confirm and adjust the installation position of the projector and screen referring to “Installing the Projector and a Screen” (1 page 9).

If the left and right sides of the picture are not parallel to the left and right sides of the screen, set “V Keystone” in the INSTALL SETTING menu to “Manual,” press ENTER, then adjust with M or m so that they becomes parallel.

3Adjust so that both ends of the bottom side of the picture fit those of the bottom side of the screen using the adjuster and the ZOOM + or –.

8 Press the FOCUS buttons + or– to adjust the focus again.

 

 

Preparations

andConnections

Step 4:

 

 

 

 

Selecting the

 

 

 

Menu Language

 

 

 

 

 

 

 

 

 

You can select one of thirteen languages for displaying the menu and other on-screen displays. The factory default setting is English.

LIGHT INPUT 2

DYNAMIC

STANDARD

CINEMA

 

PICTURE MODE

 

USER 1

USER 2

USER 3

 

ENTER

 

4-6

APA

MS SLIDE

MENU

3

WIDE MODE

LENS

RESET

VOLUME SIDE SHOT

+ +

– –

Tip

You can operate the menu using the M/m/</, (arrow) buttons on the side panel of the projector instead of the M/m/</,/ ENTER buttons on the remote control.

1 Plug the AC power cord into a wall outlet.

The ON/STANDBY indicator lights in red and the projector goes into standby mode.

Step 4: Selecting the Menu Language 23 GB