Sony VPL-HS20 Projecting, 1 Plug the AC power cord into a wall outlet, 3 Turn on the equipment connected to the projector, display, Example:, Press INPUT to

Projecting

1 Plug the AC power cord into a wall outlet.

The ON/STANDBY indicator lights in red and the projector goes into standby mode.

ON/

STANDBY Lights in red.

2 Press the [/1 (on/standby) switch to turn on the projector.

The ON/STANDBY indicator lights in green.

ON/

STANDBY Lights in green.

3 Turn on the equipment connected to the projector.

Refer to the operating instructions of the connected equipment.

4 Press INPUT repeatedly to select the input you want to project on the screen.

Display the indication of the input you want.

Example: To view the picture from the video equipment connected to the VIDEO INPUT jack.

Video 1

NTSC 3.58

INPUT

To view the picture from	Press INPUT to
	display
Video equipment connected to	Video 1
VIDEO INPUT on the projector
Video equipment connected to S	S-Video 1
VIDEO INPUT on the projector
RGB/component equipment	Input-A*
connected to PJ MULTI INPUT via
the optional signal interface cable or
the interface unit
Video equipment connected to PJ	Video 2
MULTI INPUT via the optional signal
interface cable or the interface unit
Video equipment equipped with S	S-Video 2
VIDEO connected to PJ MULTI
INPUT via the optional signal
interface cable or the interface unit
Component equipment connected to	Component
Y / PB/CB / PR/CR on the projector
Digital video equipment connected to	DVI*
digital (DVI) connector on the
projector
Equipment connected to HDMI	HDMI
connector on the projector
“Memory Stick” inserted into the	MS
“Memory Stick” slot

*Set the “Input-A Signal Sel.” or “DVI Signal Sel.” setting in the

SET SETTING menu according to the input signal. (1 page 34)

Note

Before you change the “DVI Signal Sel.” setting, disconnect the DVI cable and turn off the digital tuner, etc.

5 Press ZOOM +/– to adjust the size of the picture.

ZOOM +/– button

GB 26 Projecting the Picture on the Screen