Others

This section describes how to solve the problems, how to replace a lamp and air filter, etc.

TroubleshootingPower

The power is not

c Wait for about one minute

turned on.

before turning on the power.

 

(1 page 27)

 

c Close the lamp cover securely.

 

(1 page 62)

 

c Close the air filter cover

 

securely. (1 page 63)

 

 

Picture

 

No picture.

c Check that the proper

 

connections have been made.

 

(1 page 13)

 

c Select the input source correctly

 

using the INPUT button.

 

(1 page 26)

 

c Set the computer signal to output

 

from an external monitor.

 

c Set the computer signal to output

 

only to an external monitor.

 

 

No picture. (cont.)

c Select “Computer”,

 

“Component” or “Video GBR”

 

for “Input-A Signal Sel” in the

 

SET SETTING

menu

 

according to the input signal.

 

(1 page 34)

 

 

 

The picture from the PJ

c Select “Computer”,

MULTI connector is

“Component” or “Video GBR”

colored strange.

for “Input-A Signal Sel” in the

 

SET SETTING

menu

 

according to the input signal.

 

(1 page 34)

 

 

 

Color balance is

c Adjust the picture in the “Adjust

incorrect.

Picture ...” of the PICTURE

 

SETTING

menu

 

(1 page 32).

 

cSet “Color System” in the SET

SETTING menu to match the color system being input. (1 page 34)

The picture is too dark. c Adjust the contrast or brightness in the “Adjust Picture ...” of the

PICTURE SETTING menu properly. (1 page 32)

The picture is not clear. c Adjust the focus with the FOCUS +/–. (1 page 27)

cCondensation has occurred on the lens. Leave the projector for about two hours with the power on.

The picture flickers. c Adjust “Dot Phase” for “Adjust Signal...” in the INPUT

SETTING menu properly. (1 page 33)

Sound

No sound.c Sound can be heard only when an MPEG1 format movie picture of the “Memory Stick” is played. (1 page 47)

cAdjust “Volume” in the

PICTURE SETTING menu, or press VOLUME + on the remote control.

On-screen display

On-screen display does c Set “Status” in the MENU

not appear.SETTING menu to “On.” (1 page 35)

Remote control

The remote control c Batteries could be weak.

does not work.Replace with new batteries. (1 page 6)

cInsert the batteries with correct polarities. (1 page 6)

Others

Troubleshooting 59 GB