Sony VPL-HS20 Off, Top, HV:, Off, On:, Item, Item, Off:, Blue, Off:, Item, Auto:, Black, Manual:, Description, Description, INFORMATION, Description, MENU SETTING

MENU SETTING

Item	Description
Status	Set to Off to turn off the on-screen
	displays except for the menus, message
	when turning off the power, and warning
	messages.
Language	Selects the language used in the menu and
	on-screen displays. Available languages
	are: English, Dutch, French, Italian,
	German, Spanish, Portuguese, Russian,
	Swedish, Norwegian, Japanese, Chinese,
	and Korean.
Menu Position	Selects the display position from Top
	Left, Bottom Left, Center, Top Right
	and Bottom Right.
Menu Color	Selects the tone of the menu display from
	White or Black.

INSTALL SETTING

Item	Description
V Keystone	Corrects the vertical trapezoidal distortion
	of the picture. (	)
	Auto: Normally set to this postion.
	Manual: Sets a lower value (– direction)
	when the bottom of the trapezoid is
	longer than the top. Sets a higher value
	(+ direction) when the top of the
	trapezoid is longer than the bottom. If
	you project the picture using “Side
	Shot” only, set to “Manual,” and adjust
	the level to “0.”
	Note
	The “V Keystone” adjustment may not correct
	the trapezoidal distortion perfectly, depending on
	the room temperature or the screen angle.
Side Shot	Corrects the horizontal trapezoidal
	distortion of the picture. (	)
	Set the level to “0” when you adjust the
	picture using “V Keystone” only.
	Note
	Even when projecting using “Side Shot”,
	four sides of a picture may sometimes not
	be parallel to the sides of a screen frame.
Image Flip	Flips the picture on the screen horizontally
	and/or vertically.
	Off: The picture does not flip.
	HV: Flips the picture horizontally and
	vertically.
	H: Flips the picture horizontally.
	V: Flips the picture vertically.
Background	Selects the background color of the screen
	when no signal is input. You can select
	“Black” or “Blue.”
Test Pattern	When set to On, a test pattern is displayed
	on the screen when adjusting using the
	“Lens Zoom,” “Lens Focus,” “Side Shot”
	or “V Keystone.” If you do not want to
	display a test pattern, set to Off.
High Altitude	Off: Use this setting when using the
Mode	projector at normal altitudes.
	On: Use this setting when using the
	projector at an altitude of 1,500 m or
	higher.

INFORMATION

Item	Description
fH	Displays the horizontal frequency of the
	input signal.
fV	Displays the vertical frequency of the input
	signal.
Lamp Timer	Indicates how long the lamp has been
	turned on.

Menus the Using

Menu Lists 35 GB