•When using the memory select switch, make sure to firmly move the switch to the end. If you do not switch it completely, it may cause a problem or malfunction.

•Check your memory selection on the “Memory Stick” before inserting it into the “Memory Stick” slot of the compatible device.

•When you use “Memory Stick” with memory select function, you can choose the type of memory by switching the memory select switch. As the compatible device will only access the memory selected by you, note the following:

-A formatting (initializing) process is executed for the selected memory only.

-Remaining memory display reflects only selected memory information.

-Error display reflects only selected memory information.

Each memory is handled individually by selecting it.

What is MagicGate ?

MagicGate is copyright protection technology that uses encryption technology.

Format that can be displayed with this projector

The projector can display the picture files recorded by a digital camera and recorded on a “Memory Stick” in the following format:

•Image files (DCF-compatible) compressed in the JPEG (Joint Photographic Experts Group) format (extension: .jpg)

•MPEG1 format picture files recorded by Sony products; MPEG MOVIE, MPEG MOVIE AD,

MPEG MOVIE EX, MPEG MOVIE HQ, MPEG MOVIE HQX, MPEG MOVIE CV, VAIO Giga pocket (equivalent to video CD).

Before using a “Memory Stick”

Terminal

Write-protect tab

Labeling position

•When you set the “Memory Stick” erasure prevention switch to “LOCK,” data cannot be recorded, edited, or erased.

•Some “Memory Sticks” (“Memory Stick PRO”/ ”Memory Stick PRO Duo”) are not equipped with a write-protect tab. Make sure not to edit or erase data

by mistake when using “Memory Stick” which is not equipped with a write-protect tab.

•Use a sharp object, such as a ballpoint pen, to move the “Memory Stick Duo” erasure prevention switch.

•Data may be damaged if:

-You remove the “Memory Stick” or turn off the unit while it is reading or writing data.

-You use the “Memory Stick” in a location subject to the effects of static electricity or electric noise.

•We recommend that you make a backup copy of important data that you record on the “Memory Stick.”

Notes

•Do not attach anything other than the supplied label to the “Memory Stick” labeling position.

•Attach the label so that it does not stick out beyond the labeling position.

•Do not write forcefully on the “Memory Stick Duo” memo area.

•Carry and store the “Memory Stick” in its case.

•Do not touch the connector of the “Memory Stick” with anything, including your finger or metallic objects.

•Do not strike, bend, or drop the “Memory Stick.”

•Do not disassemble or modify the “Memory Stick.”

•Do not allow the “Memory Stick” to get wet.

•Do not use or store the “Memory Stick” in a location that is:

-Extremely hot, such as in a car parked in the sun

-Under direct sunlight

-Very humid or subject to corrosive substances

About formatting “Memory Stick”

When “Memory Sticks” are shipped from the factory, they are already formatted to a special standard. When you format “Memory Stick,” we recommend formatting them on this projector.

Caution when formatting “Memory Stick” on a personal computer

Pay attention to the following points when formatting “Memory Stick” on a personal computer. Operation of “Memory Stick” formatted on a personal computer is not guaranteed on this projector. To use a “Memory Stick” that has been formatted on a personal computer, the “Memory Stick” must be reformatted on this projector. If it is not reformatted, all data stored on the “Memory Stick” will be lost.

Access Indicator

If the access indicator is turned on or is flashing, data is being read from or written to the “Memory Stick.” At this time, do not shake the projector or subject it to shock. Do not turn off the power of the projector or remove the “Memory Stick.” This may damage the data.

Stick”

“Memory a Using

 

 

About a “Memory Stick” 39 GB