Sony VPL-HS20 Selecting the Wide Screen Mode, Projecting, Press WIDE MODE, 6 Press FOCUS +/– to adjust the focus, To turn off the power, 2Press the [/1 switch again

6 Press FOCUS +/– to adjust the focus.

Adjust to obtain sharp focus.

FOCUS +/– button

To turn off the power1Press the [/1 (on/standby) switch.

A message “POWER OFF?” appears on the screen.

2Press the [/1 switch again.

The ON/STANDBY indicator flashes in green and the fan continues to run to reduce the internal heat. Also, the ON/STANDBY indicator flashes quickly during which you will not be able to light up the ON/STANDBY indicator with the [/1 switch.

3Unplug the AC power cord from the wall outlet after the fan stops running and the ON/STANDBY indicator lights in red.

You can turn off the projector by holding the [/1 (on/ standby) switch for about one second, instead of performing the above steps.

Selecting the Wide Screen Mode

You can enjoy various wide screen mode according to the video signal received. You can also select it using the menu. (1 page 33)

LIGHT	INPUT
DYNAMIC	STANDARD	CINEMA
	PICTURE MODE
USER 1	USER 2	USER 3
	ENTER
APA	MS SLIDE	MENU
		WIDE MODE button
WIDE MODE	LENS	RESET

VOLUME SIDE SHOT

+ +

– –

Press WIDE MODE.

Each time you press the button, you can select the “Wide Mode” setting.

Projecting

Selecting the Wide Screen Mode 27 GB