Sony VPL-PX21 Connecting with a VCR/15k RGB/ Component Equipment, On the USB function

Using USB equipment (e.g., USB mouse)

Connect the USB equipment to the USB connector on the connector panel.

You can connect your computer to the projector via the RGB connector, 5BNC connector or DIGITAL RGB connector. (The example below uses the RGB connector.)

DIGITAL

RGB RGB

Right side

5BNC

REMOTE	CONTROL S	VIDEO IN
	IN		L	R
RS-232C		S VIDEO VIDEO	(MONO)
	PLUG IN POWER		AUDIO
OUTPUT		INPUT B

	MONITOR	AUDIO		RGB	AUDIO	MOUSE
	INPUT A
		DIGITAL
		RGB RGB
		5BNC		RGB	AUDIO	MOUSE
	USB
	DIGITAL RGB	R/R-Y/PR	G/Y	B/B-Y/PBSYNC/HD		VD
					Stereo audio
USB					connecting
					cable (not
cable A
					supplied)
type-B
type						HD D-sub
(sup-
						15-pin
plied)
						cable
Other USB
						(supplied)
equipment
to USB	to					to audio
port	monitor					out
	out

Computer

Note

Set the DIGITAL RGB/5BNC/RGB switch to the suitable position depending on the connection.

On the USB function

When connecting the projector to a computer by using the USB cable for the first time, the computer recognizes the following devices automatically.

1USB hub (general use)

2USB human interface device (wireless mouse function)

3USB human interface device (projector control function)

The computer also recognizes the device connected to the downstream connector on the projector.

Recommended operating environment When you use the USB function, connect your computer as illustrated above. This application software and the USB function can be used on a computer loaded with Windows 98, Windows 98 SE or Windows 2000 preinstall models.

Connecting

Notes

•As the projector recognizes the USB mouse when the computer is connected to the USB connector, do not connect anything to the MOUSE connector.

•Your computer may not start correctly when connected to the projector via the USB cable. In this case, disconnect the USB cable, restart the computer, then connect the computer to the projector using the USB cable.

•This projector is not guaranteed for suspend, standby mode. When you use the projector in suspend, standby mode, disconnect the projector from the USB port on the computer.

•Operations are not guaranteed for all the recommended computer environments.

Connecting with a VCR/15k RGB/ Component Equipment

This section describes how to connect the projector with a VCR, external active speakers, and 15k RGB/ component equipment.

Also refer to the instruction manuals of the equipment to be connected.

When making connections, be sure to:

•turn off all equipment before making any connections.

•use the proper cables for each connection.

•insert the plugs of the cables properly; plugs that are not fully inserted often generate noise. When pulling out a cable, be sure to pull it out from the plug, not the cable itself.

Right side
REMOTE	CONTROL S	VIDEO IN
	IN				L	R
RS-232C		S VIDEO		VIDEO	(MONO)
	PLUG IN POWER				AUDIO
OUTPUT		INPUT B
MONITOR	AUDIO		RGB		AUDIO	MOUSE
INPUT A
	DIGITAL
	RGB RGB
	5BNC		RGB		AUDIO	MOUSE
USB
DIGITAL RGB	R/R-Y/PR	G/Y	B/B-Y/PBSYNC/HD			VD
S-Video cable					Audio/video
(not supplied)					cable
					(supplied)
to S video					to audio/video
output					outputs
Active speakers				VCR

17 (GB)