Sony VPL-PX21 operating instructions Using the Menu, Picture Ctrl Menu

Using the MENU / The PICTURE CTRL Menu

Using the MENU

The projector is equipped with an on-screen menu for making various adjustments and settings.

To select the language used in the menu, see page 26 (GB).

1 Press the MENU key.

The menu display appears.

The bar on the icon of the currently selected menu is highlighted in yellow.

PICTURE CTRL	INPUT-A
CONTRAST:	80
BRIGHT:	50
RGB ENHANCER: 30
GAMMA MODE: GRAPHICS
COLOR TEMP: LOW

2 Use the M or m key to select a menu, then press the , or ENTER key.

The selected menu appears.

Menus	Setting items
SET SETTING		INPUT-A
	STATUS:	ON
	INPUT-A:	COMPUTER
	AUTO INPUT SEL: OFF
	LANGUAGE:	ENGLISH
	SPEAKER:	ON
	POWER SAVING:	OFF
	SIRCS RECEIVER:	FRONT&REAR

3 Make setting or adjustment on an item.

For details on setting individual items, see the relevant menu pages.

To clear the menu display

Press the MENU key.

The menu display disappears automatically if no key is pressed for one minute.

To reset items that have been adjusted

Press the RESET key.

“Complete!” appears on the screen and the settings appearing on the screen will be reset to their factory preset values.

Items which can be reset are:

•“CONTRAST”, “BRIGHT”, “COLOR”, “HUE”, “SHARP” and “RGB ENHANCER” in the PICTURE CTRL menu.

•“DOT PHASE”, “SIZE H” and “SHIFT” in the INPUT SETTING menu.

About the memory of the settings

The settings are automatically stored in the projector memory.

When no signal is input

When there is no input signal, “NO INPUT–Cannot adjust this item.” appears on the screen, and each item cannot be adjusted.

The PICTURE CTRL Menu

The PICTURE CTRL (control) menu is used for adjusting the picture.

Unadjustable items depending on the input signal are not displayed in the menu.

When the video signal is input

PICTURE CTRL	VIDEO
CONTRAST:	80
BRIGHT:	50
COLOR:	50
HUE:	50
SHARP:	50
D.PICTURE:	ON
COLOR TEMP: LOW
COLOR SYS: AUTO

When the RGB signal is input

PICTURE CTRL	INPUT-A
CONTRAST:	80
BRIGHT:	50
RGB ENHANCER: 30
GAMMA MODE: GRAPHICS
COLOR TEMP: LOW

Operation

1. Select an item

Use the M or m key to select the item, then press the

,or ENTER key.

2.Adjust an item

•When changing the adjustment level:

To increase the number, press the M or , key.

22 (GB)