0
1
LAMP/ | TEMP/ | POWER | ON/ |
| 2 |
COVER | FAN | SAVING | STANDBY |
| |
|
|
|
| INPUT |
|
|
| MENU | PATTERN | LIGHT | 3 |
|
|
|
| VIDEO MEMORY | |
|
| ENTER | RESET |
|
|
9 8765 4
1I / 1 (on / standby) key
Turns the projector on and off when the projector is in the standby mode. The ON/STANDBY indicator lights in green when the power is turned on.
When turning off the power, press the I / 1 key twice following the message on the screen, or press and hold the key for about one second.
For details on steps for turning off the power, see “To turn off the power” on page 20 (GB).
2INPUT key
Selects the input signal. Each time you press the key, the input signal switches as follows:
| B VIDEO |
| B |
|
| |||
|
|
|
| |||||
|
|
| b |
| ||||
|
| |||||||
|
|
| ||||||
3VIDEO MEMORY key
You can adjust the image in advance and store the setting in the VIDEO MEMORY 1 to 6. You can recall the setting by pressing this key. Pressing this key selects memory number 1 through 6, and then starts again with 1. You can easily set, change and view the image in a suitable setting.
For more details on how to set the video memory, see the VIDEO MEMORY of the INPUT SETTING menu on page 25 (GB).
4LIGHT key
If you press this key while the power is on, the keys on the control panel will be displayed in orange. Press this key again to turn off the light.
The light will turn off automatically if no keys are operated for 30 seconds.
5PATTERN key
Displays the test pattern on the screen for focus adjustment. Press again to clear the test pattern.
6RESET key
Resets the value of an item back to its factory preset value. This key functions when the menu or a setting item is displayed on the screen.
Location and Function of Controls
7ENTER key
Enters the settings of items in the menu system.
8MENU key
Displays the
9Arrow keys (M/m/</,)
Used to select the menu or to make various adjustments.
0Indicators
LAMP/COVER: Lights up or flashes under the following conditions:
•Lights up when the lamp has reached the end of its life or the lamp does not turn on as a result of high lamp temperature.
•Flashes when the lamp cover or air filter cover is not secured firmly.
TEMP (Temperature)/FAN: Lights up or flashes under the following conditions:
•Lights up when temperature inside the projector becomes unusually high.
•Flashes when the fan is broken.
POWER SAVING: Lights up when the projector is in the power saving mode. When POWER SAVING in the SET SETTING menu is set to ON, the projector goes into the power saving mode if no signal is input or no keys are operated for 10 minutes. Although the lamp goes out, the cooling fan keeps running. In the power saving mode, no key functions for the first 40 seconds. The power saving mode is canceled when a signal is input or any key is pressed.
ON/STANDBY: Lights up or flashes under the following conditions:
•Lights in red when the AC power cord is plugged into the wall outlet. Once in the standby mode, you can turn on the projector with the I / 1 key.
•Lights in green when the power is turned on.
•Flashes in green while the cooling fan runs after turning off the power with the I / 1 key. The fan runs for about 120 seconds after turning off the power.
The ON/STANDBY indicator flashes quickly for the first 40 seconds.
During this time, you cannot turn the power back on with the I / 1 key.
For details on the LAMP/COVER and the TEMP/FAN indicators, see page 37 (GB).
11 (GB)