The INSTALL SETTING Menu

DIGIT KEYSTONE

Corrects the trapezoid caused by the projection angle. If the base edge is longer, set a negative value; if the upper edge is longer, set a positive value to square the image.

Note

If “ZOOM”, “FULL” or “NORMAL” have been selected in the ASPECT of the INPUT SETTING, you can change the trapezoid.

INSTALLATION

Sets to reverse the picture horizontally or vertically.

FLOOR-FRONT:The picture is not reversed.

CEILING-FRONT: The picture is reversed horizontally and vertically.

FLOOR-REAR:The picture is reversed horizontally.

CEILING-REAR:The picture is reversed vertically.

Note

In case of using a mirror, be careful of installation since the picture may be reversed.

CINEMA BLACK

Switches the lamp wattage during projection. OFF: Normal wattage.

ON: Enhances the black by reducing the lamp wattage.

If the CINEMA BLACK is set to ON, the next time the power is turned on, the lamp will use the OFF setting for the first minute, and then go to ON.

It will take 2 - 3 seconds to change the wattage.

LAMP TIMER

Indicates how long the lamp has been turned on.

Note

This only displays the time. You cannot alter the display.

28 (GB)