Sony VPL-VW10HT Changing the aspect, To correct the trapezoid, The picture size for the screen size

To correct the trapezoid

When the projecting image is a trapezoid, change the projector’s position/height by moving the adjuster.

For details on “How to use the adjuster”, see page 10 (GB).

If the image is still a trapezoid, correct it in DIGIT KEYSTONE in the INSTALL SETTING menu.

When the base edge is longer than the upper edge as shown in the figure below:

Set the value to negative.

When the upper edge is longer than the base edge as shown in the figure below:

Set the value to positive.

Note

If “ZOOM”, “FULL” or “NORMAL” have been selected in the ASPECT of the INPUT SETTING menu, you can change the trapezoid.

For details on “DIGIT KEYSTONE”, see page 28 (GB).

Changing the aspect

You can change the aspect according to the video signal. For details on the menu screen operation, see “Using the Menu” on page 21 (GB).

1 Press the MENU key to display the menu.

2 Press the M or m key to select INPUT SETTING menu, then press the , or ENTER key.

3 Press the M or m key to select ASPECT, then press the , or ENTER key.

INPUT SETTING	VIDEO
ASPECT:	FULL
VIDEO MEMORY:	FULL THROUGH
	NORMAL
	NORMAL THROUGH
	ZOOM
	SUBTITLE
	WIDE ZOOM
	VIDEO/60

Projecting

4 Make setting or adjustment on an item.

For details on setting individual items, see page 24 (GB).

The picture size for the screen size

Refer to the following for selecting the aspect.

When the 4:3 picture is displayed on the 16:9 screen

Example: The 120 inch screen is used.

2,656

1,494

1,992

The 98 inch picture is displayed

16:9 screen	4:3 picture
Size	Unit (mm)	Size
Unit (mm)		(Inch)
(Inch)
90		73
1,992
	1,494
1,121	1,121
110		90
2,435
	1,826
1,370	1,370

120 98

2,656

1,992

1,494

1,494

19 (GB)