The SET SETTING Menu

The SET SETTING menu is used for changing the settings of the projector.

SET SETTING

INPUT-A

 

STATUS:

ON

INPUT-A:

COMPONENT

INPUT-B:

COMPONENT

LANGUAGE:

ENGLISH

POWER SAVING:

OFF

SIRCS RECEIVER:

FRONT&REAR

STATUS (on-screen display)

Sets up the on-screen display.

ON: Shows all of the on-screen displays.

OFF: Turns off the on-screen displays except for the

menus, a message when turning off the power, and warning messages.

INPUT-A

Selects the computer, component, DTV YPBPR or DTV GBR signal input from the INPUT A connectors.

Note

If the setting is not correct, “Please check INPUT-A setting.” appears on the screen and the color of the picture becomes strange or the picture is not displayed.

INPUT-B

Selects the computer, component, DTV YPBPR or DTV GBR signal input from the INPUT B connectors.

Notes

•If the setting is not correct, “Please check INPUT-B setting.” appears on the screen and the color of the picture becomes strange or the picture is not displayed.

•Set the progressive component signal, e.g. DVD, to “COMPONENT”; 15k RGB signal, e.g. game machines, to “COMPUTER”.

The SET SETTING Menu / The INSTALL SETTING Menu

LANGUAGE

Selects the language used in the menu and on-screen displays.

Available languages are: English, French, German, Italian, Spanish, Japanese and Chinese.

POWER SAVING

When set to ON, the projector goes into the power saving mode if no signal is input for 10 minutes. The power saving mode is canceled when a signal is input or any key is pressed.

SIRCS RECEIVER

Selects the remote control detectors (SIRCS receiver) on the front and rear of the projector.

FRONT & REAR: Activates both the front and rear detectors.

FRONT: Activates the front detector only.

REAR: Activates the rear detector only.

The INSTALL SETTING Menu

The INSTALL SETTING menu is used for changing the settings of the projector.

INSTALL SETTING

INPUT-A

 

KEYSTONE MEM: OFF

DIGIT KEYSTONE: 01

INSTALLATION: FLOOR-FRONT

CINEMA BLACK: ON

LAMP TIMER: 234h

KEYSTONE MEM

ON: DIGIT KEYSTONE setting is stored.

The data is retrieved when the projector power is turned on. The setting will remain the same every time.

OFF: DIGIT KEYSTONE is reset to 0 when the power is turned on the next time.

27 (GB)