Sony VPL-VW10HT Connecting, ojectingpr, up Setting and, Connecting with a VCR/15k RGB/ Component/Progressive Component Equipment

Connecting

When making connections, be sure to:

•turn off all equipment before making any connections.

•use the proper cables for each connection.

•insert the plugs of the cables properly; plugs that are not fully inserted often generate noise. When pulling out a cable, be sure to pull it out by the plug, not the cable itself.

Connecting

Left side

CONTROL S IN	VIDEO IN
PLUG IN POWER	S VIDEO	VIDEO
TRIGGER			INPUT A
	G/Y	B/CB/PB	R/CR/PR SYNC/HD	VD
REMOTE			INPUT B
RS-232C	G/Y	B/CB/PB	R/CR/PR SYNC/HD	VD
(FOR SERVICE USE)

up Setting and

Connecting with a VCR/15k RGB/ Component/Progressive Component Equipment

This section describes how to connect the projector with a VCR, external active speakers, and 15k RGB/ component/progressive component equipment.

Also refer to the instruction manuals of the equipment to be connected.

Left side

to RGB/ component/ progressive component output

Pin Cable (not supplied)

Active speakers

ojectingpr

CONTROL S IN	VIDEO IN
PLUG IN POWER	S VIDEO	VIDEO
TRIGGER			INPUT A
	G/Y	B/CB/PB	R/CR/PR SYNC/HD	VD
REMOTE			INPUT B
RS-232C	G/Y	B/CB/PB	R/CR/PR SYNC/HD	VD
(FOR SERVICE USE)

S-Video cable	Video cable
(not supplied)	(not supplied)

Active speakers

to S video	to video
output	output
VCR

15k RGB/Component equipment

Notes

•Set the aspect ratio using ASPECT in the INPUT SETTING menu according to the input signal.

•To connect a 15k RGB/component/progressive component equipment, select the COMPUTER/ COMPONENT/DTV YPBPR/DTV GBR in the INPUT-A or INPUT-B in the SET SETTING menu according to the input signal.

For details on setting, see page 27 (GB).

•Use the composite sync signal when you input the external sync signal from 15k RGB/component equipment.

•You can connect a high definition equipment. The connection method is the same as above.

Connecting to an HDTV 1035/60i

Set the input setting to “DTV YPBPR/DTV GBR.” Use the composite sync signal when you input the external sync signal.

15 (GB)