2 Press M/m to select “Position” or “Range,” and specify it more delicate color position and color range you want to adjust using </,.

4 Adjust the color of the specified portions.

Press M/m to select “RCP Color” or “RCP Hue,” then adjust the color or hue of the portions selected in step 3 to suit your taste using </, while watching the projected picture. The picture is returned to normal color during adjustment.

5 After the adjustment is complete, press .

The RCP window disappears and the picture of step 2 is appeared. Then after a few seconds, normal picture is restored.

Tip

There are some limitations on selection of position and range.

Using the Supplied Software to Adjust the Picture Quality (ImageDirector3)

By using the “ImageDirector3” (supplied as a CD-ROM), you can make the desired gamma correction from a computer connected to the projector. Connect the REMOTE or the NETWORK connector of the projector with a computer and start-up “ImageDirector3” on the computer.

For details on how to use the “ImageDirector3”, refer to the Help within the CD-ROM.

Notes

•You need to install the “ImageDirector3” on a computer beforehand.

•When connecting the REMOTE connector or the NETWORK connector with a computer, connect while the power of the computer and the projector are off.

36