Set the amount to adjust with < / , buttons for the horizontal direction (H direction) and with M / m buttons for the vertical direction (V direction). You can select the position to adjust again by pressing 
.
Reset: Returns to the factory settings.
| Note |
|
|
| Depending on the adjustments made above, colors may become | ||
| uneven or the resolution may change. | ||
|
|
| |
Network Setting | You can set internet protocols such as IP address, Subnet Mask, | ||
| Default Gateway, and DNS Server when accessing the projector | ||
| from a computer or using “ImageDirector3”application | ||
| supplied. |
| |
| IP Address Setup |
| |
| Selects either “Auto (DHCP)” or “Manual.” When you select | ||
| “Manual,” set the following “IP Address,” “Subnet Mask,” and | ||
| “Default Gateway.” After completing all of settings, select “Apply” | ||
| using m button, then press | . | |
IP Address
Sets the IP Address of the projector. (1.0.0.0 to 223.255.255.255)
Subnet Mask
Sets the Subnet Mask of the projector. (1.0.0.0 to 255.255.255.255)
Default Gateway
Sets the Default Gateway of the projector. (1.0.0.0 to 223.255.255.255)
Primary DNS
Sets the DNS server to be used as a priority. (1.0.0.0 to 223.255.255.255)
Secondary DNS
Sets the alternative DNS server. (1.0.0.0 to 223.255.255.255)
MAC Address
Displays MAC address of the projector. You cannot change.
54