| 12 Reverse the projector, then | 14 Remove the air filter. |
| place it on the cloth. |
|
Note
Be sure that the projector is placed on a stable surface.
13 Remove the filter holder.Claws
15 Attach the new air filter so that it fits into the each claws (5 positions) on the filter holder.
Note
Attach the Air Filter aligning it with the shape of the filter holder.
Also, do not touch the fan after removing the air filter that is set deep inside the projector.
16 Attach the filter holder.Hook
When the air filter cover (supplied) has been attached because the projector is installed on the ceiling, remove this air filter cover before removing the filter holder.
For detailed information on the dust protector, see “Ceiling Installation” (1 page 78).
Note
Attach the filter holder securely by pressing on the hook until a click is heard. The projector will not turn on unless the filter holder is securely closed.
68