Expert Setting | NR (Noise Reduction) | |||||||
| Reduces the roughness or noise of the picture. | |||||||
| Usually, select “Off”. | |||||||
| If the picture is rough or noisy, select a setting from among “Low”, | |||||||
| “Middle” or “High” according to the input signal source. | |||||||
|
|
|
|
|
|
|
|
|
| DRC Mode | |||||||
| Sets the picture quality to be best suited for the input signal. | |||||||
| Mode 1: Select this for sharp picture from input signal without side | |||||||
|
| panel information, etc. | ||||||
| Mode 2: Select this for sharp picture from input signal with side panel | |||||||
|
| information, etc. | ||||||
| Off: Does not convert the input signal to DRC. | |||||||
|
|
|
|
|
|
|
|
|
|
| Note | ||||||
| Depending on the input signal, the picture quality of “Mode1”and | |||||||
| “Mode2” may not differ. | |||||||
| DRC Palette: You can adjust the “Reality” and “Clarity” of a picture as | |||||||
|
| desired on the DRC palette when selecting “Mode 1” or “Mode 2”. | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To increase the value for “Clarity,” press the , button.
To decrease the value for “Clarity,” press the < button.
To increase the value for “Reality,” press the M button.
To decrease the value for “Reality,” press the m button.
Film Mode
Reproduces
Auto1: Automatically detects the
Auto2: Automatically detects the
Off: Does not detect the
Black Level Adj. (Adjust)
Produces a bolder, dynamic picture.
Set according to the input signal source.
High: Gives higher emphasis to the black color.
Low: Gives lower emphasis to the black color.
Off: Cancels this feature.
Note
Depending on the setting of x.v.Color, this item cannot be set.
Menus the Using
43