Operating the

Projector

Click “Control.” You can perform various adjustments and settings of the projector on a computer display.

The functions of the buttons in the windows are the same as those on the remote control supplied with the projector.

Settings of the projector are lit.

After you have changed the settings on the projector, click “Refresh” at the upper right- hand corner of the window to update the status. The lighting buttons are changed.

Setting the

Information

Click “Setup.” The Password Properties dialog box appears. The name of the “User” account is preset without a password to “root” at the factory. You can set the owner information, etc. Click “Apply” at the lower part of each window to update the projector to the data input in each window.

Owner and projector information

Click “OWNER INFORMATION.”

Owner

Enter owner information.

Projector

Enter the location of the projector.

Memo

Enter a memo, if required.

Network settings

Click “NETWORK.”

Internet Protocol (TCP/IP)

Normally, set “Obtain an IP address automatically (DHCP).” If you select “Specify an IP address,” set the necessary items.

Computer a from Projector the Operating

57