Sony VPL-W400QM manual Location and Function of Controls, Battery installation

Location and Function of Controls

Battery installation

1 Push and slide to open the lid.

2 Install the two size AA (R6) batteries (supplied) with the correct polarity.

Be sure to install the battery from the ’ side.

•The remote control detectors on the projector do not operate when the Remote Commander is being used as a wired Remote Commander. If you wish to use the Remote Commander as a wireless Remote Commander, be sure to remove the connecting cable from both the Remote Commander and the projector.

3 Replace the lid.

Notes on batteries

•Be careful that the battery orientation is correct when inserting batteries.

•Do not mix old battery with new one, or different types of batteries.

•If you do not intend to use the Remote Commander for a long time, remove the batteries to avoid damage from battery leakage. If a battery has leaked, remove the batteries, wipe the battery compartment dry and replace the batteries with new ones.

Notes on wireless Remote Commander operation

•Be sure that there is nothing to obstruct the infrared beam between the Remote Commander and the projector.

•The operation range is limited. The shorter the distance between the Remote Commander and the projector, the wider the angle within which the commander can control the projector.

12 (EN)