Sony VPL-W400QM manual To turn off the power

To turn off the power

1 Press and hold the POWER key on the control panel or the Remote Commander for about one second.

The POWER indicator flashes in green and the fan continues to run for about 1 minute and 30 seconds to reduce the internal heat. The POWER indicator flashes quickly for the first minute. During this time, you will not be able to turn the power back on with the POWER key. After about one minute, you can turn on the power with the POWER key.

2 Wait until the fan stops running and the STANDBY indicator lights in red; then press the MAIN POWER switch to turn off the main power (o OFF).

Notes

•Do not to press the MAIN POWER switch while the fan is still running; the fan will stop while the lamp is still hot, leading to breakdown.

•To make the lamp life last longer, do not turn off the power at least for about 10 minutes after turning on the power.

Note on changing picture modes

This projector provides you with the various choices of picture modes.

Please select a picture mode taking into account that one which changes the aspect ratio of the original picture will provide a different look from that of the original image.

Please also note that if the projector is used for profit or for public viewing, modifying the original picture by switching picture modes may constitute an infringement of the rights of authors or producers which are legally protected by laws.

19 (EN)