Sony VPL-W400QM manual Connection Example, Connecting 15k RGB/Component Equipment

Connection Example

For details on how to conncet a VCR or external active speakers, see page 14. Also refer to the instruction manual of the equipment to be connected.

When making connections, be sure to:

•Before connecting any cables, make sure that each piece of equipment to be connected is turned off.

•Use cables appropriate for the equipment to be connected.

•A loose connection may cause hum or noise.

•When disconnecting a cable, pull it out from the plug; not the cable itself.

Connecting a BNC connector:

2 Twist to the right.

1Align the pins with the pin holes and push in the plug into the socket.

Connecting 15k RGB/Component Equipment

15k RGB/component equipment					to RGB/component output
	Front
							Connecting cable (not supplied)
to a wall outlet	to AC IN
AC power cord
(supplied)
	VIDEO IN		AUDIO IN				INPUT-A		AUDIO IN
	S VIDEO	VIDEO	L (MONO)	R	R/R-Y/PR	G/Y	B/B-Y/PB	C.SYNC	L	R

Notes

•This unit cannot accept separate sync signal with 15k RGB/component input signal. Use composite sync (negative) or Sync on Green.

•Select the RGB, COMPONENT, HDTV signal1) with the INPUT-A item on the SET SETTING menu.

..........................................................................................................................................................................................................

1)The picture may not be correctly displayed when an HDTV signal with external sync signal is input. To view the HDTV signal, input the G signal with the sync signal or Y signal with the sycn signal, to the INPUT-A G/Y connector. Do not connect the external sync signal to the INPUT-A C. SYNC connector.

32 (EN)