Sony VPL-W400QM manual Projecting, Main Power

Projecting

1 MAIN POWER

Rear remote control detector

O ON ⁄o OFF

Front remote control detector

			5
		POWER	2
	MUTING
	PIC
3	AUDIO
	INPUT		POWER indicator
	RESET	VOLUME
		MENU

E

N

TER

PATTERN	PICTURE		MENU
	MUTING	VOLUME
	AUDIO	RESET	ENTER

INPUT	POWER	POWER	2
SELECT
	u STANDBY
	LAMP
	TEMP	LIGHT

4 3 STANDBY indicator

1 Press the MAIN POWER switch on the rear of the projector (O ON).

The STANDBY indicator lights in red and the projector goes into the standby mode.

2 Press the POWER key on the Remote Commander or the control panel.

The POWER indicator lights in green.

3 Switch on equipment connected to the projector. Press the INPUT SELECT key on the control panel or the INPUT key on the Remote Commander to select the input source.

INPUT-A:Selects signal input from the INPUT-A and AUDIO IN L/ R connectors.

VIDEO: Selects signal input from the VIDEO IN and AUDIO IN L/ R connectors.

(If you have made connections to both the S VIDEO and the VIDEO connectors, the signal from S VIDEO connector is selected.)

(continued)

15 (EN)