Sony VPL-W400Q Specifications, Optical characteristics, Electrical characteristics, Input/Output

Specifications

Optical characteristics

Projection system	3 LCD panels, 1 lens, projection
	system
LCD panel	1.35-inch TFT LCD panel,
	1,538,640 pixels (512, 880
	pixels × 3)
Lens	1.6 times zoom lens,
	f 50 to 80 mm/F 2.5 to 3.1
Lamp	250W, metal halide lamp
Projection picture size
	16:9 screen
	Range: 41 to 300 inches
	(diagonal measure)
	4:3 screen
	Range: 34 to 245 inches
	(diagonal measure)
Light output	ANSI lumen1) 400 lm
Throwing distance	16:9 screen
	41-inch: 1490 to 2280 mm
	(58 3/4 to 83 7/8 inches)
	80-inch: 3000 to 4570 mm
	(118 1/8 to 180 inches)
	100-inch: 3770 to 5740 mm
	(148 1/2 to 226 inches)
	200-inch: 7640 to 11590 mm
	(300 7/8 to 456 3/8 inches)
	300-inch: 11500 to 17450 mm
	(452 7/8 to 687 1/8 inches)

Electrical characteristics

Color system	NTSC/PAL/SECAM/NTSC4.43/
	PAL-M system, switched
	automatically
Resolution	600 horizontal TV lines
	(VIDEO input)
Speaker	Max. 2W + 2W, 7 × 4 cm
	(2 7/8 × 1 5/8 inches) stereo

Input/Output

VIDEO IN	VIDEO (composite video) : BNC
	type 1 Vp-p ±2 dB sync negative,
	75 ohms terminated
	S VIDEO: Mini DIN 4-pin type
	Y (luminance) signal : 1 Vp-p
	±2 dB sync negative, 75 ohms
	terminated
	C (chrominance) signal :burst
	0.286 Vp-p ±2 dB 75 ohms
	terminated (NTSC), burst 0.3 Vp-p
	±2 dB 75 ohms terminated (PAL)
AUDIO IN	phono type:
	500 mVrms, stereo, impedance
	more than 47 kilohms
INPUT-A	BNC type:
	Analog RGB/Component:
	R/R-Y: 0.7 Vp-p ±2 dB positive,
	75 ohms terminated
	G: 0.7 Vp-p ±2 dB positive,
	75 ohms terminated
	G with sync/Y: 1Vp-p ±2 dB sync
	negative, 75 ohms terminated
	B/B-Y: 0.7 Vp-p ±2 dB positive,
	75 ohms terminated
	C. SYNC:
	Composite sync: 0.6-8 Vp-p
	high impedance, sync negative
	HDTV Y/PB/PR:
	Y: 1 Vp-p ±2 dB,
	75 ohms terminated,
	Tri-level sync: ±0.3 Vp-p,
	Sync negative: 0.3 Vp-p
	PB/PR: ±0.35 Vp-p ±2 dB,
	75 ohms terminated
	HDTV GBR:
	G with sync: 1 Vp-p ±2 dB,
	75 ohms terminated,
	Tri-level sync: ±0.3 Vp-p,
	Sync negative: 0.3 Vp-p
	B/R: 0.7 Vp-p ±2 dB,
	75 ohms terminated

..........................................................................................................................................................................................................

1) ANSI lumen is a measuring method of American National Standard IT 7.228.

36 (EN)