Recording the CD tracks by specifying the tape length (continued)
Tip
If you made a mistake, press CANCEL. The track programed last will be cleared. Reprogram it.
Tip
To check the order of the programed tracks:
Press ENTER after step 8 and turn the jog dial. The track number will be displayed in the programed order.
5 Turn the jog dial (press the number buttons on the remote) to select the track you want to program and press ENTER.
Repeat this step.
EDIT
6 Press ENTER.
The minimum tape length you need to record the programed tracks flashes in the display.
EDIT
7 To change the recording time, turn the jog dial and input the time again.
If you do not change the recording time, skip to step 8.
8 Press ENTER.
EDIT
9 Insert a blank tape into the tape compartment.
10 Press DUB START CD mTAPE.
Recording will start on the front side automatically.
REC 
EDIT
28EN The Tape Player