Connecting a portable MiniDisc recorder (continued)

Tip

To record a track from a number of different CDs, EDIT 1 TRACK is useful (page 29).

1Do steps 2 through 6 on pages 29 and 30.

2Press DUB START CD mMD.

When recording of a certain track has finished, the CD and MD enter stop mode.

To record on an MD using the analog connections:

1 Connect the optional audio connecting cord (RK-G136, etc.) to the LINE OUT jack on this player and the

LINE IN (OPTICAL) jack on a portable MD recorder.

2 Turn on the power.

3 Start recording on the component connected.

4 Start playing a CD on this player.

When recording a radio program or tape, tune in a station or play the tape after step 3 above. (If noise is heard while recording a radio program on an MD, keep the portable MD recorder as far away as possible from this player and reorient the portable MD recorder.)

Recording a CD on a portable MD recorder

You can record the whole CD on an MD using a specific button on the player.

DUB START

CONTROL

CD mMD

MD mCD

DC OUT

 

 

OPTICAL

MD CONTROL (6V 800mA MAX)

LINE IN

LINE OUT

DIGITAL OUT(CD)

MZ-R30/R50

1 Place a CD on the player.

2 Press CONTROL MD mCD so that you can operate the CD section on the player.

MD Link

3 Insert a blank MD into the MD recorder, and locate the point you want to start recording. For details, refer to the instruction manual of the portable MD recorder.

4 Set the SYNCHRO REC switch on the portable MD recorder to “ON”.

5 Check the indications appearing in the display on the MD recorder, then press DUB START CD mMD.

Recording starts.

To stop recording

Press pon the CD section.

44EN Setting Up