Tip

If you made a mistake, press CANCEL. The setting entered last will be cleared. Re-enter it.

Tips

•To exit the standby mode, press STANDBY twice to make the t indication disappear.

•The preset settings remain until you reset them.

•When you select both sides recording, the recording will stop after the both sides recording finishes so that accidental recording will not be made.

•The display window does not light while the recording timer is on.

6 Set the timer to the hour and the minutes you want

to start recording.

 

1 Turn the jog dial

 

to set the hour and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

press ENTER.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 Turn the jog dial to set the minutes, and press

 

ENTER.

 

7 Set the timer to the hour and the minutes you want

 

 

The

to stop recording. (Do as step 6.)

 

8 Turn the jog dial to set the volume you want, and

Timer

press ENTER.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9 Press STANDBY.

 

The power goes off and the player enters the

 

standby mode. The tindication and the recording

 

side of the tape (front side (or reverse side 9)

 

appear in the display. To change the recording

 

side, press STANDBY again.

 

At the preset time, the power will go on and the

 

recording will start. Then the power will go off at

 

the preset time, and the player will enter the

 

standby mode again.

 

continued

The Timer 37EN