Connecting optional components (continued)

Tip

You can record the sound of the connected component. Insert a blank tape into the tape compartment, and press r/Pthen (on the tape section.

Listening through the speakers of other audio equipment

 

Front panel of this

 

player

Amplifier

 

to line input jack Audio connecting

to LINE OUT

cable RK-G129HG

 

(1.5 m) (not supplied)

1Connect the LINE OUT jack of this player with the analog line input jack of the amplifier, etc., using the audio connecting cable (not supplied) .

2Turn on the power of this player.

Recording a CD on a DAT recorder

DAT recorder, etc.

to digital input

jackDigital connecting cable* POC-DA12P, etc. (not supplied)

Front panel of this player

to OPTICAL DIGITAL OUT (CD)

Notes

•As long as “CD” appears in the display, the optical digital output jack is in operation and the jack lights even if the CD is in stop mode.

•If you play a CD that is not for audio use, such as a CD-ROM, noise may be heard.

1 Connect the digital connecting cable (not supplied) to the digital input jack the DAT recorder and the OPTICAL DIGITAL OUT jack of this player.

2 Turn on the power of this player and the connected component.

3 Start recording on the connected component.

4 Start playing a CD on this player.

*Select the connecting cable depending on the type of the digital input jack of the recorder to be connected. For details, refer to the instruction manual of the component to be connected. The OPTICAL DIGITAL OUT (CD) jack of this player is square-shaped jack.

46EN Setting Up