Troubleshooting (continued)
Radio
Tape Player
Symptom | Remedy |
The audio is not stereo. | • Press MENU to make “STEREO” appear in the |
| display and press ENTER. |
|
|
The audio is weak or has poor | • Depending on the FM reception conditions, |
quality. | noise may be heard. |
| • Replace all the batteries with new ones if they |
| are weak. |
| • Move the player away from the TV. |
| • If you are using the remote while listening to |
| MW/LW radio, noise may be heard. This is |
| unavoidable. |
|
|
The picture of your TV becomes | • If you are listening to an FM program near the |
unstable. | TV with an indoor antenna, move the player |
| away from the TV. |
The tape does not move when you | • Insert the tape properly and close the tape |
press an operation button. | compartment securely. |
| • Replace all the batteries with new ones. |
|
|
The buttons for recording do not | • Make sure the safety tab of the tape in the tape |
function/The tape does not play. | compartment is in place. |
| • Press pon the tape section to switch the |
| function of the player to “TAPE”. |
|
|
The tape does not erase completely. | • Clean the erasing heads (see page 54.) |
|
|
The tape does not record. | • Make sure the tape is inserted properly. |
| • Make sure the safety tab of the tape in the tape |
| compartment is in place. |
|
|
The audio is weak/The audio | • Clean the heads, pinch rollers and capstans (See |
quality is poor. | page 54). |
| • Demagnetize the heads using a demagnetizer |
| (see page 54). |
|
|
The tape player cannot be paused | • The tape player can be paused during recording |
during playback. | only. |
52EN |
| Additional Information |
| ||
|
|
|