Specifications
CD player section
System
Compact disc digital audio system Laser diode properties
Material: GaAlAs
Wave length: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 μW (This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical
Spindle speed
200 r/min (rpm) to 500 r/min (rpm) (CLV) Number of channels
2 Frequency response
20 - 20,000 Hz
Below measurable limit
Radio section
Frequency range
FM | 87.5 - 108 MHz | |
MW | 531 | - 1,602 kHz |
|
|
|
LW | 153 | - 279 kHz |
|
|
|
IF
FM: 10.7 MHz
MW/LW: 450 kHz
Aerials
FM: Telescopic aerial
MW/LW:
Recording system
Approx. 130s (sec.) with Sony cassette
TYPE I (normal): 100 - 10,000 Hz
General
Speaker
Full range: 5 cm (2 in.) dia., 8 ohms, cone type × 4
Control
MD CONTROL jack Input
LINE IN jack (stereo minijack) Minimum input level 250 mV
Outputs
Headphones jack (stereo minijack)
For 16 - 68 ohms impedance headphones DC OUT (6 V 800 mA MAX) jack
LINE OUT jack (stereo minijack)
Rated output level 250 mV at load impedance 47 kilohms
OPTICAL DIGITAL OUT (CD) jack (optical output connector)
Wavelength: 630 - 690 nm Maximum power output
10 W + 10 W Power requirements
For personal audio system:
230V AC, 50 Hz
12 V DC, 8 R20 (size D) batteries
For memory
6 V DC, 4 R6 (size AA) batteries
For remote commander:
3 V DC, 2 R6 (size AA) batteries Power consumption
AC 37 W
Battery life
For personal audio system
FM recording
Sony R20P: approx. 3.5 h
Sony alkaline LR20: approx. 10 h
Tape playback
Sony R20P: approx. 1 h
Sony alkaline LR20: approx. 2.5 h
CD playback
Sony R20P: approx. 1 h
Sony alkaline LR20: approx. 2 h
Dimensions (incl. projecting parts) Approx. 482 × 238 × 125 mm (w/h/d)
(19 × 5 3⁄8 × 5 inches)
Mass (incl. batteries)
Approx. 5.2 kg (11 lb. 7 oz) Supplied accessories
AC power cord (1) MD connecting cord (1) Remote commander (1)
Design and specifications are subject to change without notice.
Optional accessories
Sony MDR headphone series
Additional Information |
| 55EN |
| ||
|
|
|