This is the Internet version of the user’s guide. © Print only for private use.

To change the default ring tone or alert

1.Tap the drop-down menu.

2.Select Default Melody for the P908 default or Find sound to select a new one.

3.If required, change folder.

4.Select the required sound

5.Tap and to preview the sound.

6.Tap Select to set this sound.

Warning! The volume may be uncomfortably loud at the higher volume levels if the phone is close to your ear. Exposure to excessive volume may damage hearing.

Note To set vibrating alert, silent mode, speakerphone or mute the microphone, tap the volume icon on the status bar.

Calls tab

These settings set incoming call alerts. For more information see ‘Ring signals’ on page 145.

You may personalize the ring melodies further for individual contacts, see ‘To change the details of a contact’ on page 104.

•Ring (voice) – Select a ring signal for incoming voice calls.

•Ring (voice) line 2 – Select a ring signal for incoming voice calls.

•Ring (data) – Select a ring signal for incoming data calls.

•Ring volume – Set the preferred sound level for handheld, handsfree and car use.

•Increasing ring – Select the checkbox to use increasing ring signals. This disables the other volume settings.

Messages tab

These settings set messaging alerts.

•Display notification message – Select the check box to receive notification of a received message.

•SMS – Select an alert for received SMS messages.

•Email – Select an alert for received Email messages.

•MMS – Select an alert for received MMS messages.

•Area info – Select an alert for received area information messages.

•Auto setup – Select an alert for auto setup messages.

Other tab

These settings set button and screen clicks, reminders, alarms, and other notifications.

•Button clicks – Select the sound used when you press a key on the keypad.

•Screen taps – Select the sound used when you tap the screen.

150

Control panel