Sony Ericsson P908 To add a network to the preferred list

This is the Internet version of the user’s guide. © Print only for private use.

Cable

Use Cable to set the cable connection mode and the connection parameters used when communicating through your P908's cable port.

•Set the cable connection mode. Please note that you must set the mode to Modem when using the P908 as a modem and when using the DUN (Dial-up Networking) Wizard.

•Set the baud rate, parity, number of stop bits, character length and type of flow control required for the connection. When connecting your P908 via the desk stand to a USB port on your PC, use the following (default) settings:

Baud rate	115200
Parity	None
Stop bits	1
Character length	8
Flow control	CTS/RTS

GSM Networks

This option lets you choose what net to use when you are outside your operator’s area. Choose if you want to search for a new network or use a preferred one. You can also make a list of preferred networks.

•Search mode – Select between automatic or manual search for a network.

•Select network – Tap the button to get a list of available networks.

•New search – Tap the button to search for available networks.

•Preferred list – Show the networks that your P908 will search for when you are outside your home network.

Note Your operator may not allow you to access all available networks.

Tip You can set the cable connection mode when the Flip is

closed by selecting Applications > Connections >

Cable.

To add a network to the preferred list

1.Tap Add network.

2.Select a network from the displayed list.

3.Select a position in the Preferred list and tap Done.

154 Control panel