This is the Internet version of the user’s guide. © Print only for private use.

Including a tone sequence in the call setup. After the phone

number, but before the digits, press and hold to insert a pause, represented by the character p. Then press your

digits. Finally make the call by pressing .

Support for TTY

Teletype (TTY) accessory, text phone, is an aid for people with speech impairments.

Program digit sequences into a Contact card for the service. Each digit sequence to be sent as tones must begin with pc. Once your call to the service has been established and you want to send one of your pre- programmed digit sequences, choose Show contact on the Phone menu to get to the Contact card with the tone sequences.

Contacts Edit Unfiled

Bank

+4613244500 p1#1234567890

p10#0#34#56789 (w)

p30#1234#56 (w)

p10#1#567890123 (w) p20#123456789 (w)

To use the TTY device together with the P908

1.Connect the TTY device to the accessories connector at the base of the P908.

2.In Phone, go to Edit > Preferences > TTY Accessory and select

the check box to set the P908 into TTY mode.

Refer to the TTY device user manual to find out how to use the device. It may be necessary to use an adapter between the TTY device and the P908.

You can still make normal calls with the P908 in TTY mode but other accessories such as handsfree will not work properly.

Do not open the Flip during a TTY call. It will impair the quality of the connection.

Note It is not advisable to program any personal codes into your P908, in case your phone is stolen or lost.

Note Support for voice carry over (VCO) and hearing carry over (HCO) is handled through the TTY device and not through the phone.

Phone

53