Sony Ericsson P908 New Dial-Upor High-Speed Dial-Upaccount

This is the Internet version of the user’s guide. © Print only for private use.

GPRS Advanced tabs

Log in	The settings on this tab deal with IP and DNS
	addresses.
	The DNS address uniquely identifies your Internet
	Service Provider (ISP)'s computers, which your P908
	uses to connect to the Internet. Your P908 can
	normally fetch these addresses automatically from
	most ISPs.
	If, after setting up an Internet account, you cannot
	connect to the Internet and you suspect these
	addresses are incorrect, ask your ISP for their
	primary and secondary DNS addresses.
	An IP address consists of four 3-digit boxes and valid
	input is between 000 and 255 in each box.
Proxy	A proxy server is a computer connected between
	your P908 and the computer you communicate with.
	This arrangement can be used for connections to
	Remote Sync servers, or within a company network.
	If this setting is needed, your company's Information
	Services department or Remote Sync provider must
	give you instructions.
Other	If your ISP supports Point to Point Protocol (PPP)
	extensions, you can select the Enable PPP extensions
	check box. PPP extensions allow your P908 to
	provide features such as encryption, which increases
	the security of your Internet connection.

GPRS Advanced tabs

	Authentication is used by some network operators to
	identify the mobile phone connecting to their GPRS
	network. There are different methods, or protocols,
	for doing this.
	Normal: PAP (Password Authentication Protocol).
	The user's username and password are transmitted
	over the network in an unencrypted form.
	Secure: CHAP (Challenge Handshake
	Authentication Protocol). The user's username and
	password are never transmitted over the network.
	None: No authentication is required by the network
	operator.
QoS	Check with your network operator before changing
	any of the QoS (Quality of Service) settings.
	If your operator supports the use of Header
	compression, selecting On can speed up your
	connection.
	The settings Precedence, Delay, Peak rate, and Mean
	Rate are all by default set to Subscribed, which
	means that your operators default QoS (Quality of
	Service) values will apply. Reliability is set as Class 3
	by default.

New Dial-Up or High-Speed Dial-Up account

Your Internet Service Provider (ISP) supplies you with your User name, your Password, and their Phone number, which your P908 dials to connect to the Internet. If you have a High-Speed Dial-

Control panel 157