This is the Internet version of the user’s guide. © Print only for private use.

3.Set the Start , which is the number of seconds before the item appears after the start of the page. The default is 0, meaning show or play immediately.

4.The default Duration is for the item to continue for the remaining duration of the page. To change this, un-check Page time and change the duration to the required value in seconds. Start time + duration cannot exceed total page time.

You can also tap , or select Edit > Page time to see the time settings for all items in a page. Tap the time bar to adjust the time settings for each item.

To add or delete a template

To make a template from a message, select Save as template, give the template a name, and tap Done.

To delete a template, tap the name of the template you want in the Select template dialogue and tap Delete.

To set the download method for receiving multimedia messages, manual or automatic

In Control panel, select Connections > Messaging accounts >

MMS > Automatic.

Off means that only headers will be downloaded and can be viewed.

Home only means the same as for On below, but only valid in your home country/region.

On means that the multimedia message is downloaded and can be read like any other message. There is no intermediate step.

Handling e-mails

Writing e-mailsTo write a new e-mail

Select an e-mail account and select Message > New.

If you leave the message before sending it, it will automatically be stored in the Draft folder (unless you edit a message which was already located in Outbox).

To mark an e-mail as urgent

On the address tab, select High in the Priority list.

To enter addresses from Contacts when writing an e-mail

1.Select To:

2.In the Select contact dialogue select the check box for each entry you want to send the e-mail to.

3.Select Done.

Tip To enter several addresses manually (without using Contacts) in a text message, multimedia message or in an e- mail: enter a comma between each address.

Messages

93