This is the Internet version of the user’s guide. © Print only for private use.

Once paired with a Bluetooth-enabled laptop, your P908 is ready to make a connection to the Internet or corporate network. Because Bluetooth is wire-free and requires no line-of-sight alignment, you can place the laptop in a comfortable position and let your P908 remain in your pocket, briefcase, or even be placed up to 10 metres away.

If you wish to use an infrared link, the range is typically up to 1 metre. The two infrared ports must be kept in line of sight, at an angle of no more than approximately 30 degrees.

Make sure that you have any information concerning, for example, phone numbers, names of servers or domains, that the server that you want to connect to may require.

To set up a GPRS or HSCSD (High-Speed Circuit Switched Data) connection using the Dial-Up Networking Wizard

1.Start the Dial-Up Networking Wizard from the Sony Ericsson folder of the Start menu on your PC.

2.Choose Create a new Dial-Up connection.

3.Follow the instructions in the wizard.

The Dial-Up Networking Wizard

The wizard simplifies creating GPRS DUN connections by setting the proper values in the PC DUN entry and linking the entry to one of the GPRS configurations in your P908. You can also view and modify the GPRS settings in the P908.

For HSCSD DUN entries, it updates the modem settings such that the specified data rate and type of bearer (ISDN / Analogue) will be used when you make a DUN connection.

You can view or change the DUN entries created with the wizard using the standard Windows® DUN user interface.

The Dial-Up Networking Wizard software included in the PC Suite for P908 must be installed in your PC and your P908 must be connected to the PC via cable, infrared or Bluetooth wireless technology. See ‘Connecting to other devices’ on page 135.

To edit a previously created DUN entry

1.Start the Dial-Up Networking Wizard from the Sony Ericsson folder of the Start menu on your PC.

2.Modify a Dial-Up connection.

3.Select the desired connection from the list.

4.Follow the instructions in the wizard.

To define P908 as a modem

To set up a CSD (GSM Data) or HSCSD connection you will need to install your P908 as a modem manually.

To set up a Dial-Up entry for CSD or HSCSD

1.On the PC, open the Control Panel.

2.Choose to install a new modem.

Getting started with Internet and Messages

175