This is the Internet version of the user’s guide. © Print only for private use.

2.Select the Type of file to move or delete.

3.Select the Location folder.

4.Tap one or more check boxes to select the files to copy or delete.

5.To copy files, tap Copy and select the destination folder. To delete files, tap Delete. You will be asked to confirm.

Uninstalling applications

If you uninstall an application, you can always reinstall it if you want to use it later.

To uninstall applications

1.Select Uninstall.

A list of applications that can be uninstalled is shown.

2.Select the application to uninstall.

3.Select Uninstall.

Note You cannot uninstall the standard applications that came with your P908.

WIM PIN settings

WIM (WAP Identity Module) is used for performing security functions, especially to store and process information needed for user identification and authentication. It is a tamper-resistant store for private keys, certificates and other items that may require a PIN for access or modification.

The WIM management dialogue consists of a PIN choice list and a WIM items list.

You can select a PIN from the PIN choice list. The WIM items list changes content dynamically, displaying only the keys that are protected by the selected PIN and also have an associated certificate. Other keys that are protected by the selected PIN but do not have an associated certificate are not shown in the WIM item list. This is the case when WIM PIN (PIN-G) is selected.

Note The PIN-G applies to the whole WIM and any items that do not have a different PIN. This means that no specific items on the WIM are linked to PIN-G.

You can change status of a PIN:

Enable PIN A PIN code that is enabled is requested for authorisation of an operation. To proceed with the operation you must enter the PIN code.

Disable PIN A PIN code that is disabled is not requested to authorise an operation to proceed.

Control panel

169