Appendix A Installing BlackBerry Connect
There are two variants of BlackBerry Connect software you can install; one for use with BlackBerry Enterprise Solution and the other for use with BlackBerry Internet Service. Requirements for running BlackBerry Connect software on your phone differ depending on the type of BlackBerry service you are installing.
Setting up BlackBerry Enterprise Solution
You can set up BlackBerry Enterprise Solution wirelessly or via the USB cable. Follow your preferred method, either described in “Setting up BlackBerry Enterprise Solution wirelessly” below or see Setting up BlackBerry Enterprise Solution with USB cable on page 31.
Setting up BlackBerry Enterprise Solution wirelessly
You will need:
•The phone with a version of the Phone and
Organizer software that is approved for use with the BlackBerry Connect software. Please check your
operator's Website to determine the required version number, and then check the software version you
have by selecting 
> More > System information. To download the latest version of the software, go to the Sony Ericsson Update Service at www.sonyericsson.com
•A BlackBerry Enterprise Solution enabled SIM card from your service provider.
•A password provided by your IT administrator.
•If BlackBerry is not installed, you will need a BlackBerry Connect setup file (.sis).
You can transfer the .sis file to your phone in many ways. For example with your phone browser from www.sonyericsson.com, or via email or Bluetooth, or you can download the .sis file with your PC and then transfer it to your phone. If you use your PC to transfer the file to your phone you need:
–An Intel™ 486 compatible PC or better. Running Windows 2000, or Windows XP.
–A USB port with 1.1 compatibility or greater.
–Sony Ericsson PC Suite for Smartphones.
Appendix A Installing BlackBerry Connect 29