Basic operation
To operate the GUI application, connect and use a USB mouse (use left clicks only).
When you connect a USB keyboard with this unit, shortcut keys can be used.
Regarding specific shortcut keys for each screen, refer to the HELP information by clicking on the 
on upper right of the screen.
To move to a desired screen
Select an icon on the tool bar located at the top of the screen.
When you connect a USB keyboard, you can move to a desired screen by pressing the underlined letter of an icon and the Ctrl key in the keyboard simultaneously.
1 | 2 | 3 | 4 |
The current selected screen is one with the icon in yellow on the tool bar.
1HOME button
Press this icon to move to the HOME screen.
2CAMERA setting tool bar
Press the icon corresponding to the screen to which you want to move for the camera settings.
Camera images can be displayed on the following screens:
SHUTTER: Shutter mode and shutter speed
GAIN/LUT: Gain and LUT (look up table)
HIGH RATE SCAN: High rate scan (partial scan of an image and binning)
ADMIN: Camera settings made at the factory (pedestal level and CDS gain)
GUI application
Note
The ADMIN screen is exclusively for service personnel. If the CDS gain or pedestal level is changed, the performance of the camera may be degraded. Refer all such adjustments to qualified service personnel.
3SETUP tool bar
Press the icon corresponding to the screen to which you want to move for settings except camera settings.
GENERAL: Date, time, Web monitor and keyboard settings
NETWORK: Network functions
SERIAL I/F: Serial communication speed
4Camera image display area
A camera image is displayed here on the HOME, SHUTTER, GAIN/LUT, HIGH RATE SCAN, and ADMIN screens.
Note
The CCD pixels of the
14