Note
When the cycle of the input trigger is smaller than the trigger delay value set, the image is not output correctly. Pay attention to this fact when you set the trigger delay value.
5SOFTWARE TRIGGER button
This button is used to capture an image immediately after pressing the button.
3SAVE button
This button is used to save the currently set values.
4CANCEL button
This button is used to cancel changes.
5Note button
This button is used to display the trigger instruction.
6FULL SCREEN button
This button is used to display a camera image on the full screen.
7? (HELP) button
This button is used to display HELP information.
Shortcut keys
When you connect a USB keyboard with this unit, you can use the following shortcut keys in the SHUTTER screen:
Shortcut | Applicable button |
|
|
Alt + W | SOFTWARE TRIGGER |
|
|
Alt + S | SAVE |
|
|
Alt + C | CANCEL |
|
|
Alt + F | FULL SCREEN |
|
|
Alt + H | HELP |
|
|
When you press the Alt and S keys on the keyboard to save, the confirmation guidance is displayed on the screen. You can press one of the following keys to be assigned:
ENTER: Press the ENTER key if it’s OK.
ESC: Press the ESC key if you want to cancel.
GUI application
GAIN/LUT (Look Up Table) screen
This screen is used for setting the camera gain and gamma.
16
2 | 3 | 4 | 5 |
1GAIN up down counter
You can set the gain of this unit from the following range in units of 1 dB:
[0 to 18] (dB)
2LUT radio buttons
The look up table is used to change the gamma setting of this unit.
You can select one of the following settings using a radio button:
•γ = 1 (OFF)
•γ = 0.45
•γ = 2.2
•Reverse
•Binarization
Binarization is selected for changing the look up table to binary.
You can set the threshold within the following range of the threshold up down counter:
[1 to 1023]
3SAVE button
This button is used to save the currently set values.
4CANCEL button
This button is used to cancel changes.
17