■Help of the Partial Scan Setting

[Command]

partial --help

[Process]

Displays the help of the Partial Scan

 

Setting command.

External Control Commands

Reboot Request

■Reboot Request

[Command]

reboot

[Process]

Reboots the XCI-SX1/V3.

Version Information Request

■Version Information Request [Command] version

[Process]

Displays the model name and software

 

version.

Status Request

■Status Request [Command] status

[Process]

Displays the following items.

 

• Model Name

 

• Hardware Version

 

• Software Version

 

• Hostname

 

• IP Address

 

• MAC Address

 

• Serial Baud Rate

 

• Serial number

Help Request

■Help Request [Command] help

Local Echo Setting

■Local Echo Setting [Command] setup echo ECHO

[Parameter]

ECHO: off, on

[Process]

Sets the local echo setting.

<Example>

Setting the local echo to OFF

 

setup echo off <CR>

 

setup save complete echo<CR>

■Current Local Echo Setting [Command] setup echo

[Process]

Displays the current local echo setting.

■Help of the Local Echo Setting [Command] setup echo --help

[Process]

Displays the help of the Local Echo

 

Setting command.

Factory Default Settings

■Factory Default Setting

[Command]

setup factory

[Process]

Sets all the camera setting and Setup

 

values to the factory default setting

 

(except for the CDS gain and pedestal

 

level).

Note

This command works same as the “Default (All)” on the HOME screen of the GUI application (page 15).

Resetting the Camera Settings

■Resetting the Camera Stettings [Command] setup default

[Process]

Sets all the camera settings other than

 

CDS gain and pedestal level to the

 

factory setting.

Note

This command works same as the “Default (Camera)” on the HOME screen of the GUI application (page 15).

Saving the Camera Settings

■Saving the Camera Settings [Command] save

[Process] Saves the camera settings (except for the CDS gain, pedestal level, TRGINH and DMAINH).

Notes

•The camera settings aren’t saved until the Save command is received.

•For the XCI-SX1, this command works same as the “SAVE” command of the GUI application and the Web application (only for the camera settings). For the XCI-V3, to save the settings of particular functions of this unit (such as FILTER, and so on), only this command can be used. You cannot use the “SAVE” command of the GUI application or the Web application.

30