■Help of the Date Setting

[Command]

setup date --help

[Process]

Displays the help of the Date Setting

 

command.

Note

You can set the DATE settings when NTP setting is set to off.

When NTP setting is set to on, the following messages are displayed.

setup date 10-01-2006<CR>

warning: NTP mode is currently set to on; please turn it off to manually set the date.<CR>

Time Settings

■Time Settings

[Command] setup time TIME [Parameter] TIME: HH:MM:SS

[Process]

Sets the time.

<Example>

Setting the time to 15:00:00

 

setup time 15:00:00<CR>

 

setup save complete time<CR>

Note

Time Setting is available only when the NTP Setting is set to OFF.

When the NTP Setting is set to ON, the following message appears.

setup time 15:00:00<CR>

warning: NTP mode is currently set to on; please turn it off to manually set the time.<CR>

■Current Time Setting [Command] setup time

[Process]

Displays the current time.

■Help of the Time Setting

[Command]

setup time --help

[Process]

Displays the help of the Time Setting

 

command.

Web Monitor Settings

■Web Monitor Settings

[Command] setup web MON/RATE/SIZE/QUA [Parameter] MONitor: on, off

frame RATE: 1 to 5 (1 step)

view SIZE: 320, 160

image QUAlity: 1 to 10 (1 step)

[Process] Sets the Web monitor.

<Example> Example of the Web monitor settings setup web on/2/320/5<CR>

setup web complete<CR>

External Control Commands

■Current Web Monitor Setting

[Command]

setup web

[Process]

Displays the current web monitor

 

setting.

■Help of the Web Monitor Setting [Command] setup web --help

[Process]

Displays the help of the Web Monitor

 

Setting command.

Camera Administrator: CDS Gain Settings

■CDS Gain Settings

[Command]

cds GAIN

[Parameter]

GAIN: 0 to 63 (1step)

[Process]

Sets the CDS gain manually.

<Example>

Example of the CDS gain setting

 

cds 63<CR>

 

camera cds complete<CR>

■Auto CDS Gain Settings [Command] cds AUTO

or

cds AUTO X Y

[Parameter] AUTO: auto

X:x-coordinate of the start point of the rectangular area of the image data to be used for adjustment

Y:y-coordinate of the start point of the rectangular area of the image data to be used for adjustment

*The size of the rectangular area of the image to be adjusted is 160 ⋅ 128 for the XCI-SX1 and 80 ⋅ 64 for the XCI- V3. You are allowed to not input the X and Y parameters. (When the X and Y parameters are not input, the

rectangular area of the image data to be used for adjustment is the center of the image area.)

[Process] Sets the CDS gain automatically. <Example> Adjusting the CDS gain automatically

using the x-coordinate and y- coordinate of the top left point of the rectangular area

cds auto 560 448<CR>

camera cds complete<CR>

■Current CDS Gain Setting

[Command]

cds

[Process]

Displays the current CDS gain setting.

■Help of the CDS Gain Setting

[Command]

cds --help

[Process]

Displays the help of the CDS Gain

 

Setting command.

26