Loading the Camera Settings

■Loading the Camera Settings

[Command]

load

[Process]

Loads the camera settings.

Note

After loading, the camera’s basic settings are reconfigured (except for the CDS gain, pedestal level, TRGINH and DMAINH).

Ethernet Mode Setting

■Ethernet Setting

[Command] setup ether MODE

[Parameter] MODE: auto, 10half, 10full, 100half, 100full

[Process]

Sets the ethernet mode.

<Example>

Setting the ethernet mode to 100 Base

 

Half

 

setup ether 100half<CR>

 

setup save complete ether<CR>

 

warning: the network will be

 

restarted...<CR>

 

you may have to re-login if

 

you are linked via

 

telnet...<CR>

■Current Ethernet Setting

[Command]

setup ether

[Process]

Displays the current Ethernet mode.

■Help of the Ethernet Setting

[Command]

setup ether --help

[Process]

Displays the help of the Ethernet

 

Setting command.

Notes

•Reboot the XCI-SX1/V3 after changing the ethernet setting.

•Set this to the same setting as the connected network.

Ideal Figure of fps

■Display the Ideal Figure of fps

[Command] fps VB HPS VPS HEND VEND [Parameter] VB (Vertical Binning): 0[off],

1[on]

HPS (Horizontal Pertial Scan): 0[off], 1[on]

VPS (Vertical Pertial Scan): 0[off], 1[on]

HEND (Horizontal pertial scan END): 0-7

VEND (Vertical pertial scan END):

External Control Commands

0-31

[Process] Displays the ideal figure of fps according to the parameters.

<Example> Ideal fps: 29.30 of 1-1-1-7-31 (v-hs-vs-he-ve)<CR>

■Current Ideal Figure of fps [Command] fps

[Process]

Displays the ideal value of fps

 

according to the current register

 

setting.

■Help of the Ideal Figure of fps [Command] fps --help

[Process]

Displays the help of the Ideal Figure of

 

fps command.

Keyboard Setting

■Keyboard Setting

[Command]

setup kbmap TYPE

[Parameter]

TYPE: en, jp

[Process]

Sets the keyboard map and preserve

 

the setting.

<Example>

Setting the layout of the keyboard to

 

English and saving the setting

 

setup kbmap en<CR>

 

setup save complete kbmap<CR>

■Current Keyboard Setting

[Command]

setup kbmap

[Process]

Displays the current keyboard map

 

setting.

■Help of the Keyboard Setting

[Command]

setup kbmap --help

[Process]

Displays the help of the Keyboard

 

Setting command.

Camera TRGINH Setting

■TRGINH Setting [Command] trginh VALUE [Parameter] VALUE: on, off

on: Invalidates the trigger.

off: Validates the trigger [Process] Switches between invalidation and

validation of the trigger. <Example> Setting the trigger to invalidation

trginh on<CR>

camera trginh complete<CR>

■Current TRGINH Setting

[Command]

trginh

[Process]

Displays the current trginh setting.

31