Command
Specifications
This section describes the details of control commands available for the
The underlined words of the [Command] represent parameters.
The bold words of the <Example> represent commands, and the others the response to the command.
Serial Communication Setting
■Baud Rate Setting
[Command] setup serial BRATE [Parameter] BaudRATE: 4800, 9600, 19200,
| 38400, 57600, 115200 |
[Process] | Sets the serial baud rate. |
<Example> | Setting the serial baud rate to 115200 |
| bps |
| setup serial 115200<CR> |
| setup save complete serial<CR> |
■Current Baud Rate Setting [Command] setup serial
[Process] | Displays the current baud rate. |
■Help of the Baud Rate Setting
[Command] | setup serial |
[Process] | Displays the help of the Baud Rate |
| Setting command. |
Network Settings
■LAN Settings
[Command] setup lan DHCP/HOST/IP/NET/
GTW/DNS
[Parameter] DHCP: auto, off HOST: Host Name IP: IP Address
| NETmask: Net Mask |
| GaTeWay: Gateway Address |
| DNS: DNS Address |
[Process] | Sets up the network. |
<Example> | • Getting the IP address from the |
| DHCP server |
| setup lan auto<CR> |
| setup save complete lan<CR> |
| warning: the network will be |
restarted...<CR>
you may have to
External Control Commands
•Setting the fixed IP address (1) setup lan off/SMARTCAM/ 11.22.33.44/255.255.255.0/ 55.66.77.88/1.2.3.4<CR> setup save complete lan<CR>
•Setting the fixed IP address (2) setup lan off//111.22.33.44///<CR> setup save complete lan<CR>
Note
•The currently set value is applied to a parameter for which no specific value is input.
•If you change a network setting, reboot the XCI- SX1/V3.
■Use the default LAN Setting [Command] setup lan default
[Process] | Uses the default settings for the |
| following items. |
| • Mailer |
| • NTP |
| • LAN |
| • SNMP |
<Example> | Restoring the default settings |
| setup lan default<CR> |
| setup save complete lan<CR> |
| the network will be restarted... you |
| may have to |
| via telnet...<CR> |
Note
If you change a network setting, reboot the XCI- SX1/V3.
■Current LAN Setting [Command] setup lan
[Process] | Displays the current LAN setting. |
■Help of the LAN Setting [Command] setup lan
[Process] | Displays the help of the LAN Setting |
| command. |
SNMP Settings
■SNMP Settings
[Command] setup snmp SNM/TRP/COM/DSC/
LOC/CTC
[Parameter] SNmp Mode: off, on TRaP: TRAP address COMmunity: Community name DeSCription: System Description
| LOCation: System Location |
| ConTaCt: System Contact |
[Process] | Makes SNMP settings. |
24